Melting Point Apparatus MPA100

SRS Stanford Research Systems - Melting Point Apparatus MPA100

OptiMelt - Automated Melting Point System

SPECIFICATIONS
OPERATION
Temperature display Melting point and melting point range
Start temp. range (Ambient + 10 °C) to 396 °C,
0 °C minimum set point
Stop temp. range (Start temperature + 4 °C) to 400 °C
Temperature resolution 0.1 °C
Ramp rate 0.1 °C to 20 °C per minute
(0.1 °C increments)
Heat-up time ~10 minutes (50 °C to 350 °C)
Cool-down time ~10 minutes (350 °C to 50 °C)
Temperature accuracy ±0.3 °C (up to 100 °C)
±0.5 °C (up to 250 °C)
±0.8 °C (up to 400 °C)
Reproducibility 0.2 °C
Temperature sensor Pt RTD (built-in)
Oven control Closed-loop PID
GENERAL
Display Back-lit, touchscreen LCD (5.8")
Printer interface RS-232 serial port. Supports Epson compatible dot-matrix printers
Computer interface USB. All instrument functions can be queried and controlled through
a high-level command set
MeltView software Windows compatible (USB port)
CAPILLARIES
Dimensions 1.4 mm to 2.0 mm outside dia., 100 mm length
Capacity Up to 3 tubes simultaneously
Fill height 2 mm to 3 mm
Power 90 to 264 VAC, 47 to 63 Hz, 125 W
Operating temperature 0 °C to 40 °C, non-condensing
Weight ±4 kg
Dimensions 19 x 25 x 21.5 (cm)

PRODUCT INTRODUCTION

OptiMelt provides a fast and accurate means of automatically determining the melting points and melting ranges of chemical substances. Up to three samples can be analyzed simultaneously. A wide observation window, with an illuminated magnification lens, allows users to observe the samples at all times. A small alumunium heating block is kept under tight computer temperature control, providing extremely linear temperature ramping.


PRODUCT FEATURES

  • Completely automated operation
  • PID-controlled temperature ramping
  • Digital movie of each melt
  • Stand-alone operation and computer control (USB)
  • Conforms to Pharmacopeia and GLP
  • Printer output

For more specification click here



Inquiry Form

Product Brand

Product Category